• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by EviLBoX

  1. E

    xp-90 and temps

    With my config below and an ambient temp of ~77F, my CPU idles at 29C and is about 38C under load.
  2. E

    Quieting a VGA Fan

    Thanks, do you know of a guide explaining how to do that?
  3. E

    BF2 GPU Performance Help!

    With the computer in my sig (6600gt) I can play BF2 @ 1600x1200 with 4x AA and medium settings no problem.
  4. E

    Quieting a VGA Fan

    I have an old GeForce II card in my linux box and the fan is LOUD. Without purchasing a new heatsink/fan for it, what can I do to quiet it down? Can I undervolt the fan? If so, how? Thanks.
  5. E

    Laptop Comparison - Dell D620 vs. E1405

    I"ve got the D620 and I'm happy with it. Mine has a dedicated graphics card (NVIDIA Quadro) and I'm able to play Battlefield 2 with decent settings. As for battery life, I haven't run it out in one sitting, so I'm not sure. I've got the 6-cell battery and I'd say it's good for 2.5-3.5 hours...
  6. E

    Dell Latitiude D620

    I've got the d620 with the Quadro NVS 110 and the only game I've tried is Battlefield 2. I can play Battlefield 2 on 1024x768 with low settings no problem, and even medium settings, but it's jumpy due to only having 1 GB of RAM. If I were to get 2 GB it would have no problem with medium settings.
  7. E

    Quiet air cooling for an overclocked Socket A?

    http://www.jab-tech.com/ThermalRight-SI-97A-pr-2999.html I went with the ThermalRight SI-97A and a Panaflo L1BX fan, in my opinion is the best as far as Socket A goes.
  8. E

    The official "clean desktop" club.

  9. E

    KVM or USB Switch?

    I have 2 computers and want to use 1 monitor, keyboard, and mouse for both of them. The monitor isn't an issue since it has 2 inputs, but I also have a PS/2 keyboard and a USB mouse. I was thinking about just buying a KVM switch, but since I don't really need the monitor connection I thought...
  10. E

    Problems OC'ing a Venice 3200+

    You're not alone, I'm stuck at 240x10 using 1.45v. I've gone as high as 1.62v and my processor fails prime at 260x10 and 250x10. I've played with the memory dividers, memory timings, different BIOS versions, etc, and still can't get higher than 2400 Mhz. One thing you can try is to use the...
  11. E

    I think my Antec P180 is

    For the most part I'm happy with my P180. My only gripe is the tabs on the side panel are already breaking off.
  12. E

    monitor cpu temp in windows

    Check out MBM5 ( Motherboard Monitor 5).
  13. E

    Issues with 3200+ Voltage

    You're not the only one. I can reach 2300 Mhz with the stock voltage, but at 2400 Mhz I have to bump it up to 1.45v. After that, no matter how much voltage I give the processor my computer isn't stable at any higher Mhz.
  14. E

    Zalman VF-700Cu

    How much better is the 700Cu than the 700AlCu? Is it really worth $10 more? Also, I assume you use Arctic Silver on the heatsink, so do I follow the Arctic Silver 5 application instructions that I used for my CPU? Other than a drop in temps, what kind of benefits will I see with this...
  15. E

    Your Lowest Temps on Air?

    My setup idles around 27-29C, load only gets up to 38C. 3200+ Venice @ 2400 Mhz w/ XP-90
See more
Back
Top