• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Visio help?

D

ddoud

Limp Gawd
Joined
Sep 21, 2004
Messages
200
I don’t know if this is the right place, but here goes:

In Visio, I can make boxes and connect them such that if I change the position of the boxes, the connection line automatically rearranges itself, but what I'd like to do is join connection lines and have them automatically rearrange themselves. Like if I were to put boxes on the tips of an H, vertically connect the two sides, and then connect the two vertical connections in the middle.

Thanks for any help!

-D
 
Visio shapes have connector points on them. You can add/delete the connector points using the (suprisingly enough) Connection Point Tool, which is the button with the blue X on it.

There are almost always connection points on the perimeter of the shape. Many of the shapes also have a connector point in the middle of the shape. I recommend connecting shapes from middle to middle. You will need to bring the shapes to the front to hide the interior part of the connector line.
 
You must log in or register to reply here.
Back
Top