• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

RAM issue

V

Vulcanus

Supreme [H]ardness
Joined
Aug 24, 2001
Messages
5,160
In my sn95g5 (v2) I've had a 1GB stick of PDP PEP1G3200LL ram in it with absolutely no problems for the past few months. I bought another stick of the same ram (although upon recieving, the pcb was a different color) and with both slots filled the bios will post but not load the os from the hard drive. The drive is still detected in the bios and setup. If I use either one stick or the other it works fine, I have also memtested both sticks individually and also together with no errors.

Is this an issue with the motherboard can't take 2 1GB sticks in dual channel, or maybe the ram just isn't compatible with each other?

Does anybody else have problems running 2 sticks together in dual channel?




EDIT: If I install both sticks, then reset the CMOS I can load winxp and reset as many times without problems, but when I turn it off and turn it back on it will not load XP. Motherboard issue??
 
You must log in or register to reply here.
Back
Top