• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Multicast and WDS/MDT

E

exchange keys

Limp Gawd
Joined
Feb 18, 2009
Messages
339
Catalyst 3560 Switch (IOS 12.2(55)SE9)
Windows Server 2008 R2
MDT 2013

I want to setup multicasting for my imaging network (vlan 2, 192.168.2.0). This won't go over any other networks. I'm not familiar on how to set this up, so maybe someone here can assist? I have IGMPv3 snooping enabled on the Global ICMP Snooping configuration.

This is what I have for VLAN 2:
-----------------------------------------
IGMP snooping : Enabled
IGMPv2 immediate leave : Disabled
Multicast router learning mode : pim-dvmrp
CGMP interoperability mode : IGMP_ONLY
Robustness variable : 2
Last member query count : 2
Last member query interval : 1000

As it currently stands, I am able to image computers, but it's kind of slow. The image is about 4 GBs, so I could benefit from using multicasting when I start imaging more than five computers pulling the same image :)
 
You're using a fast Ethernet switch. It's going to be slow.
 
vr. said:
You're using a fast Ethernet switch. It's going to be slow.
Click to expand...

You're right. It is slow. Unfortunately, it's all I have. I'm looking to get a gigabit switch soon.

Regarding my multicast question, I guess all I needed was to enable IGMP Snooping. I guess I'm good to go in that sense :)
 
You must log in or register to reply here.
Back
Top