So I swapped out my 3500+ for an FX53. I've been trying to push it to 2.6 but I just can't get it there. I have a Tt Big Typhoon with AS 3 and my system is in my sig. I tried just uping the multi to 13 (gets me to 2.61) but prime 95 failed after about 15 minutes. I get the same result if I up the FSB to 2.6. At 2.55, the speed that is stable right now, the FX idles around 30-32C and at load is in the mid 40s. I also tried raising the voltage to 1.6. I was wondering if anyone had suggestions about getting it up to 2.6.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Help OCing an FX53
- Thread starter SuX0rz
- Start date
That should of done it would think. Im running my FX-51 @ 2.4Ghz just by uping the milti. I raised the voltage and had mine running at 2.6Ghz ran PI and 3DMark without crashing but couldnt get Prime to run so I just dropped it down and never messed with it again. It is possible especially on a 53 since my 51 did it.
http://i3.photobucket.com/albums/y95/Redleader1114/26ghz.jpg
http://i3.photobucket.com/albums/y95/Redleader1114/26ghz.jpg
Yeah, when I raised the multi to 13 I figured that I would just lower the FSB from 200 to like 195 or so (to be at 2.6 instead of 2.61), but my evga board doesn't allow underclocking past 200. When I get home from work I'll try lowering the volt, but if that doesn't work then I guess I'm SOL unless I go to water or somthing.
SuX0rz said:So I upped the voltage to 1.66 and changed the multi to 13x. Ran 3dmarks 06 and so far, everything seems to be fine. Everest says my cpu temp 31C, I have still yet to try prime95.
edit: Ran prime95 and it failed after about 15 min. So close! I can run everything but prime95.
doh! pressed the wrong buttong, sorry for the double post.