• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Gigabyte P35-DS3L problem

P

p0stal

Limp Gawd
Joined
Aug 27, 2004
Messages
381
Tried searching, couldn't find anything that was quite the same as my problem.

Trying to put 4x1GB of ram in my motherboard. When I put in more than 2 sticks in any combination my motherboard will not post. When I turn it on, no video, no error beeps, sometimes it will shutdown and restart, other times it will just sit. Any combination of two sticks (all 4 swapped in and out and mixed and matched in different dimms) works just fine. Tried different BIOS', tried upping the voltages, nothing seems to help. Any suggestions?
 
I read that its generally not recommended to populate all four DIMMS and then try to run the ram at its full rated speed. Try running the ram at 667 and see if that works. I also heard that you might want to bump the voltage on the memory controller with all four slots populated. I was poking around the www.houseofhelp.com forums when i read that. Sorry, i dont have a direct link to the post i was reading earlier.
 
You must log in or register to reply here.
Back
Top