• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

FS: Nostalgic Dual CPU Fileserver!

L

Lipservice

Limp Gawd
Joined
Jul 2, 2004
Messages
248
Own a piece of history (and nostalgia!).

CaseTek Super ATX (EATX) Tower case, Model CK-1019-2B ALL ALUMINUM case.
(Big enough for dual Xeon EATX setups if you ever wanted to go that route). The case is still in fantastic shape.

Motherboard: Supermicro P3TDDE
http://www.supermicro.com/products/motherboard/P3/VIA/P3TDDE.cfm

Processors: Dual Pentium III-S Tualatin 1400mhz 512kb CPUs. Max it will take.
http://www.cpu-world.com/CPUs/Penti...7512 - RK80530KZ01751E (BX80530C1400512).html

Memory: 4x1gb Micron matched ECC SDRAM. Max it will take.

HDDs: (2) Seagate 120gb HDDs.

Floppy drive

LAN: Intel 1Gbs card (Also has onboard 100Mbps)

Video card: Nvidia Riva TNT2 model 64 32Mbytes memory.

USB: USB II card w/4 ports rear and 1 on top (Also has 2 USB I ports on rear onboard).

Case fans: 2 front/2 rear 80mm

NO SOUND (onboard or card). Eh... it's a server!

Power Supply: PC Power And Cooling 510 ATX-PFC 510watts/peak power 650watts that has about 2 months use use on it since PC Power And Cooling completely rebuilt it.

Almost new Sony DVD burner.

I can't bear to part this out. Please do not ask, besides the power supply in it is very special and you would have a heck of a time finding another one that has the right connections for the board. It is actually still quite fast. The reason I am parting it out is I FINALLY broke down and built a new fileserver. I will round up all the drive rails and software I have for it (Supermicro's website still has the drivers for it). It has Windows XP Pro on it right now but I am going to wipe the drives. I used to run Windows Server 2003 SP1 on it and it ran fine on it also. I will include a Promise ATA PCI card so you can run 4 more HDDs if you need to. Also the board has a Promise ATA/100 Controller that supports RAID 0, 1, 0+1 (I used this in RAID 0). At one time I had 8 HDDs in it!

$100 SHIPPED! EDIT: NOW $90.00 SHIPPED!! Continental USA only. You know this is gonna cost me pretty big to ship this bad boy so 100 bucks is a bargain. PayPal accepted.
HEATWARE: http://www.heatware.com/eval.php?id=2770










Older pic


Older pic
 
Last edited:
Just curious: what is the proper form-factor pinout for that power supply? It kinda looks like WTX... but I'm not 100% on that...
 
Will sell the Board/CPUs/Heatsinks/Memory/Power Supply/Rear I/O Shield for $50 shipped or $30 shipped WITHOUT the PSU, or trade for a good 4 port USB KVM switch.

Last chance. I am giving it to a friend at the end of the week if it is not sold.
 
This is going to stay up for sale just for the principal of it. The friend(?) who wanted it come to find out only wanted the case and was going to TOSS the board, memory, and CPUs! It doesn't deserve that. Price cut to $90 shipped. And it is going to cost PLENTY to ship to a good home.
 
Damn.

I was looking for a setup exactly like this a few months ago. I ended up with a P3TDDE and dual 1.4 Tuallys too.



Bump. Somebody buy this. This would make a killer 3dfx rig.
 
You must log in or register to reply here.
Back
Top