• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

cpu speed reporting diference

T

trypt

Weaksauce
Joined
Sep 20, 2006
Messages
93
I set my c2d E6400 to 6x 400mhz = 2400mhz in my BIOS. When I run cpu-z those are the numbers I'm showing 6x multiplier and 400mhz bus. However, orthos (sp2004) reports cpu speed at 3200mhz and core temp (0.95.4) is showing Frequency: 3200mhz (533 x 6)

What's going on? Also, since I'm asking questions, my idle and load temps seem to be the same whether I set 6x 400 (2.4ghz) or 7x 400 (2.8ghz) in the BIOS, I'm wondering if this is because I have the voltage manually set the same?

51 idle -- 63 load.
 
You must log in or register to reply here.
Back
Top