• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Computer won't POST.

F

Fynath

n00b
Joined
Oct 29, 2005
Messages
58
Alright, friend asked me to post this for him while he sets up an account.

He's putting a computer together for one of his friends, and it won't POST. The fans/LEDs aren't even coming on, which makes me unsure of what the problem is. I've had dead boards before but the fans and LEDs still turned on. He says everything's plugged in, and he's tried taking parts out/putting them back in one at a time. He's tried the PSU on his own computer, and his PSU on the other; the PSU worked in his computer but his PSU didn't work in the one he's building. No beeps or anything. So, thoughts?

Specs:

MSI K8N Neo NF4
AMD 3200+
6800 XFX GS PCI-E
Aspire 520W PSU
1gb Corsair XMS (2x512)
 
tried resetting cmos?

oops nevermind

if the lights/fans arent even coming on than its probably a short somewhere
 
Check to make sure that your power connector coming from switch is connected to the right jumper on the motherboard.
 
You must log in or register to reply here.
Back
Top