• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

A8V Deluxe Memory Timing Question

G

Gunter

Weaksauce
Joined
Jan 12, 2004
Messages
97
I just bought a new CPU & Board , and I was looking at the memory timings in CPUZ and they are not what they are supposed to be; im running 2x Kingston HyperX 512MB Modules PC-3200 2-3-2-6 timings, and CPUZ says the timings are 2-3-3-8. Ok, so I went into the BIOS to try to manually config the timings, and I get this;

TRC
TRFC
TRCD
TWR
TRWT
TRAS
TRP
TWCL

What are they, and what should I change?
 
The defaults are read off something called SPD, actually CPU-Z will report the SPD values on one tab and the current values on another.

2-3-2-6

Cas latency (TRC) 2
Ras to Cas delay (TRCD) 3
Ras Precharge (TRP) 2
Minimum Ras active time (TRAS) 6

Another important thing is the Command Per Clock setting, which should be 1T. 2T has about 10% worse latency so should be avoided if possible.
 
Dont think I have the Option to change the Command Per Clock setting, is it called "2T Command?" If so, I can only Enable/Disable/Auto.

Also, what should my "Burst Length" be, 4 or 8 beats?
 
You must log in or register to reply here.
Back
Top