Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Its probably bios/cpu feature like speedstep that lowers the cpu speed (multiplier) and vcore, u can turn it off in bios but i think its good to be enabled.
Your +12v is very low, is it the same in bios?
For a cooler i would say Xigmatek HDT-S1283 or Thermalright Ultra-120 eXtreme (lot of...
How did you get to the bios in the first place (to get it to 3ghz)?
Well anyway my tip would be looking at the manual. Some bios use different keys to enter bios (like f2)
I think that is the problem with most pc speaker systems, the satelites are just too small for their job. I have way cheaper logitech z-3e and i had to turn the bass down with the eq, but then i lost some of the midrange as well..
The actual problem is that i cant overclock much at all (with d805 it did the same thing). Fsb at 285mhz it starts to do this reset thing and somewhere around 320mhz it starts to reset two times before booting. I havent pushed anything to anywhere with that overclock :p . So i guess next thing...
I have e6300, asus p5b, 2x1gb 667, 7800gtx, 2 hd's. PSU is bequiet 450w, and it only has one +12v rail with 22A. When i press the power button it turns on, turns off, and the turns on again and boots up normally :confused: It worked fine with a64 3000+@2,5ghz and 2x1gb ddr1, everything else...
1. What is fsb termination voltage, and what does it do (lower better? or higher?)?
2. When i overclock and boot up my pc, it starts but shuts down right away and then starts again normally (sometimes with high enough oc it shuts down two times before starting). Could this have something to do...
Thx for the help again. It could be that my ram is the problem, but i had troube overclocking d805 too with this board. And another thing is that with e6300 i cant even oc it to fsb 333 (that would be my stock memory speed). Maybe when they put some decent bios out it will do better..
I had 0211 bios on, and i was able to change vcore, but last time i cleared cmos (with the jumper) there was only one option left in vcore (auto). Anyone know how to get the vcore options back? 0309 isnt working here at all when using dual channel, got errors in sp2004 orthos after 1 second of...