• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Wtb: single stick of ddr4 3200 16gb

Status
Not open for further replies.
D

Dreamerbydesign

Supreme [H]ardness
2FA
Joined
Feb 3, 2008
Messages
7,262
Thanks, found.

I have plenty of heat and feedback here as a buyer and seller can link if requested.

Looking for a lonely ol single stick of ddr4 3200 16gb, could be a slower speed also.

I have one proxmox server with a single of stick and could use a second. Only one slot available so no other sizes needed.
 
Last edited:
learners permit said:
Ran memtest all night on it on my bench test B450 board last night and its good to go at XMP. Didn't want to waste your time as it's a pull from a system off craigs list I parted and used for several different builds.
Click to expand...
Works perfect for me I appreciate it.
 
Reefa_Madness said:
Not that it matters to me, or impacts me, but I thought you were looking for a 16GB module, not the 8GB that is being offered?
Click to expand...
Good catch. His pm said it was a 16gb module but I should have searched the model number.

Still looking for a single 16gb stick, thanks
 
Yep, CL16, but 8GB per the model number. He may have glanced at the label and seen the "16" and thought that was the density. Some manufacturers, like Corsair state the density near the beginning of the model number, for example the Vengeance LPX 16GB (2x8GB) RAM DDR4 3200MHz CMK16GX4M2B3200C16.
 
Last edited:
Awe crap you guys are right it's an 8GB stick. I'll still send it if ya want. Sorry for the miscommunication totally my fault. I'll check to see if if any loose 16Gb modules are lying around.
 
So found a kit of F4-3000C15-32GTZ one module no post the other is running memtest on the bench test machine right now. Removed the heat spreader on the one that doesn't post and popped it in there as well and it posts now? Still testing for a good one or two 16Gb modules. Either way I'll ship one tomorrow as I don't need any of them.
 
learners permit said:
So found a kit of F4-3000C15-32GTZ one module no post the other is running memtest on the bench test machine right now. Removed the heat spreader on the one that doesn't post and popped it in there as well and it posts now? Still testing for a good one or two 16Gb modules. Either way I'll ship one tomorrow as I don't need any of them.
Click to expand...
Yes that would be great. Ironically the one stick of 16gb I have now in there was some generic ram tha didn’t post with the getting on. I removed it to id the chips under and it posted without it! Thanks again!

Thanks again!
 
Last edited:
Status
Not open for further replies.
Back
Top