• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by xtatdsm

  1. X

    How high can VCore go with watercooling?

    no one can tell you for sure, but 1.7 has been known to be the MAX you should go for 24/7 but most people prefere to keep their Vcore at 1.65 just to be a bit safer (still that does not mean it's 100% safe)
  2. X

    Good Temps?

    without knowing your ambient temp (room temp) and motherboard brand we can't help you, and even if you were to give these temps, chance that your motherboard showing the wrong temp by as high as 10C above or below the actual temp or below.
  3. X

    Overvoltaging Swiftech MCP 600

    an overvolted MCP600 (13.8 volts to be exact) is 3rd best pump after iwakiMD30 at 18 volts and 2x overvolted MCP600 @ 13.8 so yes, overvolting that specific pump is worth while. this was taken from a post done by the famous Cathar at procooling forum.
  4. X

    will this heatercore be enough?? ;)

    you are right, but what you are missing is the underload temps, so if you are thinking that one rad that will get your water to room temp at IDLE is more than enough, and anymore is just over kill, you are wrong.and what you are missing is when you load your PC and the "none-overkill rad of...
  5. X

    will this heatercore be enough?? ;)

    man this thing is just bad :) so is this one ;) , this shroud is made of wood tho
  6. X

    Chipset Block, is it worth it?

    don't get it then, your stock NB heatsink will be just fine, you might put a small fan on the top of that if you want it to be cooler, but for FSB up to umm 290 or even more, you will be fine. think of it like this, paying $50+adding heat to the loop+adding resterction to the loop+adding more...
  7. X

    why is my Danger Den DDC-12v so LOUD?!?!

    DDC is not nearly as loud as D4.
  8. X

    cheap trick to get a pump quiet

    very smart ! oh and cheap too
  9. X

    water cooling kit that replace xp-120?

    MCW6000+MCP350+single/dual heatercore (or even rad)+3/8 ID tubing will outperform that with a lot less noise too.
  10. X

    Temps seem great Just want verification

    yup, temps are looking great. but one question tho, are you running Asus motherboard?
  11. X

    My first dive into watercooling. It's ALIIIVE!!! (pics)

    looks very very clean bro. one thing tho, your GPU temps are a bit high. I am running BFG 6800 ultra with swiffy MCW50 and it idles at 41 and loads at 45 max. I think your GPU block needs to be remounted. did you use AS5 of the GPU core?? if not you should. what are you using to cool your...
  12. X

    Too many dang pump options

    I have MCP650 and the damn thing is loud (whines like hell), but if I were to do it again, I would go with MCP600, I have been thinking about DDC, but I will wait a bit more to see some more reviews b4 I go ahead and buy it. so for now, I will vote for MCP600/AquaXtreme 50Z-DC12
  13. X

    Just put together my wc, my idle/load delta is large

    try to update your bios and see if that helps. your temps will drop a bit more as the AS5 goes throw some heat cycles. plus you are using a single 120mm rad to cool your CPU and GPU, which in other words is just too much heat for the rad to cool. I am cooling my gpu/cpu in one loop and my temps...
  14. X

    Just put together my wc, my idle/load delta is large

    Remount your block. how is your VGA temp tho?
  15. X

    Just put together my wc, my idle/load delta is large

    I don't see your sig. what thermal paste did you use? did you apply it as you should? if yes, then try to remount your block. but yeah we need more information about your rig/cooling parts in order to be able to help.
See more
Back
Top