• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Stromer

  1. S

    Benchmarking problem, GPU and RAM

    Thank you very much for all your contribution. I look at this last point with 1.1V asap
  2. S

    Benchmarking problem, GPU and RAM

    Some results tend to give a 3200 MHz (memory section, windows 10), and some not (SPD section, userbenchmark) Hard to know if it really works as it should
  3. S

    Benchmarking problem, GPU and RAM

    Good question, I have that: And in Windows performance:
  4. S

    Benchmarking problem, GPU and RAM

    Looks like a clear CMOS. What are the other effects of it, do I loose my fans curves ect..? Interestingly, my RAM is not in the QVL of my MB! :banghead:
  5. S

    Benchmarking problem, GPU and RAM

    DOCP is selected and "accepted", the PC boots normaly, but looking at the CPU-Z I notice that the frequency is only at 2132 MHz
  6. S

    Benchmarking problem, GPU and RAM

    As expected, ver 8.31 on slot 2&4 only gives Nothing on Slot 1&3 Slot 2: Nanya single Slot 4: Nanya single Low performance, still 2132 MHz Note: in the meanwhile I solved the problem of the GPU benchmarking: I had to deactivate "Nahimic service" So for now only RAM issue remaining
  7. S

    Benchmarking problem, GPU and RAM

    With ver 5.22 in slots 2&4 this time I have something consistent on CPU-Z: Nothing on Slot 1&3 Slot 2: Hynix dual Slot 4: Hynix dual DOCP enabled but still low performance (even with DRAM voltage 1.4V) Now I can try the ver 8.31 on slot 2&4 and see what happens. As soon I do a mix on the 4...
  8. S

    Benchmarking problem, GPU and RAM

    I have an Asus B550F-Gaming Rog. According to CPU-Z strictly, it would mean something not logical: Slot 1: Hynix = ver 8.31 Slot 2: Nanya = but is also ver 8.31 Slot 1: Hynix = ver 5.22 Slot 2: Nanya = ver 5.22 Unless there is a problem in CPU-Z order But neither the combinaison...
  9. S

    Benchmarking problem, GPU and RAM

    Thanks. It looks a little bit complicated with Corsair Ram and Ryzen CPU.. Now I switched stick 2&3. So I have the same information slot1=slot3=SK and slot2=slot4=Nanya in CPU-Z. However the references directly written on the sticks are different! I have slot1=slot2=ver8.31 and...
  10. S

    Benchmarking problem, GPU and RAM

    Ok, thanks. How do I check if the 1.4V is better than the 1.35V without using userbenchmark? I made a CPU-Z and have following results, it seams that the RAM sticks have some different characteristics, even if they had the same reference where I bought it: Slot 1&2: Nanya ranks "single"...
  11. S

    Benchmarking problem, GPU and RAM

    Oh, yes, the benchmark I did is here: https://www.userbenchmark.com/Software How do you know what is the safe voltage for the corsair?
  12. S

    Benchmarking problem, GPU and RAM

    Dear community, I tried to benchmark my Asus configuration. I have: Ryzen 7 3700x GTX 1070ti Ram Corsair 4*8 Go Samsung 970 Evo+ I got following results: There is apparently a problem with the GPU and the RAM in this bechmark. However I have no problem to play games. I searched on...
See more
Back
Top