• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by ococ

  1. O

    new i9-9900k build - over 100c

    Yes I’ve run with the fans connected to the pump which then goes into a cpu fan header, as well as the fans plugged in separately, all running at 100%. Yes, load optimized defaults (with maxes fans) was setup. LOD has MCE on by default.
  2. O

    new i9-9900k build - over 100c

    I would’ve agreed with you 3 weeks ago. But after messing with this thing for too many hours and getting inconsistent results, I’m going to RMA the CPU, then swap out the cooler next. I’ve tried different bios. All fans and pumps set to full speeds. One one reboot I’m getting 28/81...
  3. O

    new i9-9900k build - over 100c

    Yes, I've made several changes at this point. Full speed on both the pump and the 2 fans, but it's apparent that the h80i isn't strong enough for the 9900k heat.
  4. O

    new i9-9900k build - over 100c

    I tried this. I took the main power cable from the H80vi2 which has the 2 fans also pigtailed into it, and plugged it into SYS_FAN6 PUMP. When I did that it throttled the pump as well as the fan speeds down to around 750 rpms? It also had some weird behavior. Coretemps showed the idle temps...
  5. O

    new i9-9900k build - over 100c

    Ok, I messed around with the fans and while the idle temps are still a bit higher than before ~28-30, the temps under load are ~80 for XTU. All of this is running stock speeds. With the Aorus Master I have the following: CPU _FAN, CPU_OPT, SYS_FAN1, SYS_FAN2, SYS_FAN3, SYS_FAN4, SYS_FAN5...
  6. O

    new i9-9900k build - over 100c

    I don't know what just happened. I tried to do some overclocking following Gigabyte's guide - https://www.gigabyte.com/FileUpload/Global/multimedia/2/file/525/946.pdf I set the vcore to 1.3...then 1.31 all the way up to 1.35, a 5ghz and everytime it rebooted during a benchmark test. Resigning...
  7. O

    new i9-9900k build - over 100c

    I just looked up some other tests and I don't think I'm too far off. One guy is running stock speeds with a Noctua D15 - idle temps 33, I'm at 26. AIDA 64 temps at 72c, I'm at 65c. wPrime 1024 temps at 72, I'm at 54c.
  8. O

    new i9-9900k build - over 100c

    I just remounted the cpu cooler with fresh paste. Also i tightened down the cooler more. The stock idle temps are within 1-2 deg (25-26c) now. When I run Intel XTU, it went from topping at 81 down to topping at 75, so some improvement. But P95 is still hitting 100 after only running for ~10...
  9. O

    new i9-9900k build - over 100c

    Will try that, but wouldn't that issue manifest itself at stock temps? Maybe I should install the corsair software to make sure the cooler is actually working.
  10. O

    new i9-9900k build - over 100c

    Bear with me as it's been many years since I've messed with overclocking. I just put together a new build with the following parts: i9-9900k Aorus Master Z390 (firmware F8b) Corsair Vengeance 32GB 3200mhz ram Seasonic 850W PSU Corsair H80vi2 (from old system) (noctua thermal paste) Silverstone...
  11. O

    New i9-9900k build

    I picked up a Seasonic SSR-850PX 850W.
  12. O

    New i9-9900k build

    I'm upgrading my computer after 6 years. I don't do any gaming and will be using this system for mostly Lightroom photo processing and Adobe Premiere 4k rendering. I've been using the 2600k with 16gb ram. I picked up the i9-9900k and Corsair Vengeance LPX 32GB DDR4 3200mhz ram. I plan to...
  13. O

    GPU advice for video and photo editing, non-gamer

    I found a decent deal at Best Buy today, picked up this card today for under $100. MSI Radeon RX 560 DirectX 12 RX 560 AERO ITX 4G OC 4GB Should work right?
  14. O

    GPU advice for video and photo editing, non-gamer

    Yes, I plan to update the CPU as well. Sounds like the GTX 10 series will do. Will the 2GB version work or do I need to go higher?
  15. O

    GPU advice for video and photo editing, non-gamer

    I was hoping for a card cheaper than the Quadro. What about the GTX 1050 2GB? Right now I'm just doing simple video editing using iMovie on a Macbook Pro, but looking to do more on the PC, likely with Premier Pro. thanks!
See more
Back
Top